Land Weapons

Main Battle Tank (2014)

Hyundai Rotem

K2 Black Panther

K2 Black Panther
K2 Black Panther

Despite the K1 tank giving the Republic of Korea Army a considerable technological advantage over its North Korean adversary, a new and more powerful tank was seen as necessary to keep the RoKA with a competitive edge in the 21st Century. The result is the K2 Black Panther, designed by the Korean Agency for Defense Development and built by Hyundai Rotem. Unlike the K1, which was based around the US M1, the K2 is truer indigenous design though it does incorporate numerous foreign (mostly German) components, notably a gun based on the Rheinmetal 120-mm L55 which equips the Leopard2A6, and an MTU engine that was eventually replaced by a domestic Doosan DST model. The gun is equipped with an autoloader which reduces the crew size to 3, and is supported by a fire-control system linked to an EHF radar and a laser rangefinder. The gun is stabilized and optimized for use in Korea's rugged terrain, while an advanced suspension system allows control of each individual bogie allowing the tank to adjust to various positions including leaning on one side. Primary armament is based around an indigenous APFSDS round but it can also fire the Korean Smart Top-Attack Munition (KSTAM) which is fired as a mortar and effective against numerous types of targets. Protection has been improved compared to the K1 and features explosive reactive armor (ERA) as well as both hard-kill and soft-kill systems, the former known as the Korean Active Protection System (KAPS). The K2 is also fully amphibious and NBC capable. Teething troubles delayed introduction of the K1 until 2014, with many of the first units using German components before reliable domestic components became available. Because of its high price tag, it is likely to complement rather than replace the K1. However, it has achieved some export success with Turkey being its initial customer, followed by Poland and possibly Peru.

Following the experimental pre-production XK2 units, the first batch of K2 tanks entered service in mid-2014. These were followed by a second batch which addresses some issues with the engine and transmission. License-produced Polish versions will be known as the K2PL.

Preceded by:

K1 (1985)

Succeeded by:

None

Datafile

DesignK2
NameBlack Panther
TypeMain Battle Tank
Year2014
Crew3
Dimensions
Length (w/Gun)24 ft 7½ in (35 ft 5½ in)
Width11 ft 10 in
Height7 ft 10 in
Ground Clearance0 ft 0 in
Track0 ft 0½ in
Track on Ground0 ft 0½ in
Weight
Combat121,254 lbs
Ground Pressure0 psi
SuspensionHydropneumatic
Performance
Speed (Off-Road)43 mph (31 mph)
Range (Off-Road)-
AmphibiousNo
Fording4 ft 11 in (14 ft 9 in)
Vertical Obstacle4 ft 3 in
Trench9 ft 2 in
Gradient60%
Side Slope40%
Powerplant
Engine1 x 1,500-hp
Doosan
MTU-890
FuelDiesel
Power/Weight27.27 hp/t
Armament
Main1 x 120-mm L/55
CN08

Smoothbore Gun
↑ 24° / ↓ 0° / ↔ 360°
SecondaryNone
Armor
TypeComposite/ERA
Thickness745 - 785 mm
Max Effective745 - 785 mm RHAe
Hull Upper Front745 mm
Turret Front785 mm
Production
Built320
Total320

Gallery