Land Weapons

APC (1952)

FMC

M75

M75

The M75 was the first US-designed fully tracked APC, designed immediately after World War II on the basis of the T43 cargo tractor. The M75 introduced the box-like hull that became standard in its successors, the M59 and M113, and was able to carry as many as 10 fully equipped troops in a rear compartment that was accessible through a pair of rear hull doors. The engine and transmission were installed on the front in order to facilitate removal. Drawbacks of the M75 centered on its lack of amphibious capability as well as NBC protection; it was also heavy and relatively expensive, notwithstanding the fact that it shared many automotive components (engine, transmission, and track) with the M41 light tank. These drawbacks that prompted the development of the cheaper M59, which replaced it in the 1950s. No export orders were received.

The prototypes were developed in September 1945 from the T43 cargo tractor and designated T43E1 and T43E2 before it was re-christened T18 and T18E1. The latter was eventually produced as the M75. Variants included the T64 mortar carrier and the T73 infantry vehicle.

Preceded by:

None

Succeeded by:

M59 (1953)

Datafile

DesignM75
TypeAPC
Year1952
Crew2
Dimensions
Length (w/Gun)17 ft 0 in
Width9 ft 4 in
Height9 ft 0 in
Ground Clearance0 ft 0 in
Track0 ft 0½ in
Track on Ground0 ft 0½ in
Weight
Combat41,509 lbs
Empty36,667 lbs
Ground Pressure8.11 psi
SuspensionTorsion bar
Performance
Speed (Off-Road)44 mph
Range (Off-Road)115 mi
AmphibiousNo
Fording4 ft 12 in (7 ft 8 in)
Vertical Obstacle1 ft 6 in
Trench5 ft 6 in
Gradient60%
Powerplant
Engine2 x 295-hp
Continental
AO-895-4
FuelGasoline
Power/Weight31.34 hp/t
Armament
MainNone
SecondaryAnti-Aircraft:
1 x 12.70-mm
M2HB .50 cal
Ammo12.7-mm: 1,800
Armor
TypeSteel
Thickness13 - 25 mm
Max Effective25 mm RHAe
Hull Upper Front25.4 mm
Hull Lower Rear12.7 mm
Production
Built1,729
Total1,729