The OT-62 TOPAS (which stands for Transportér Obrněný Pásový or 'tracked armored personnel carrier') was originally a Czechoslovakian/Polish license-produced version of the Soviet BTR-50 but ended up becoming a considerably modified and improved vehicle. The OT-62 borrows the same boat-like hull, made of all-welded steel, of the BTR-50. The front of the vehicle features two rounded bays which house the driver and commander, each with three vision blocks and with a hatch cover for the driver's bay (some models with one for the driver as well). The engine compartment is the rear, which leaves the troop compartment in the middle; this is provided with both roof hatches as well as side hatches which the BTR-50 lacks and thus provides an alternative means to enter or exit the vehicle. The troop compartment also features NBC protection. Amphibious capability is provided thanks to a trim vane that is erected before entering the water as well as a bilge pump that is switched on, after which the vehicle is propelled thanks to two water jets. Armament varies depending on variant, and usually consisted of a small turret equipped with a 7.62-mm machine gun or a larger turret with a 14.5-mm KPVT machine gun. A 82-mm recoilless rifle could also be carried although it could only be reloaded from outside the vehicle. Others feature a Although Czechoslovakia and Poland were the only Warsaw Pact countries to adopt the OT-62, it was an export success with Soviet clients states particularly the Middle East where major users included Egypt, Libya, and Syria. Captured vehicles were also employed by Israel.
The OT-62 TOPAS was developed in the late 1950s and is based on the BTR-50PU command vehicle variant of the BTR-50. Czechoslovakian versions are typically known by their OF-64 designation while Polish versions are known by the TOPAS designation. The OT-62A is the standard, unarmed, APC variant while those fitted with a small machine gun turret is known as the OT-62B. The OT-62D adds an 82-mm recoilless rifle in the rear deck. The TOPAS-2AP (also known as the OT-62C) is a Polish-only variant with a larger turret with a 14.5-mm KPVT machine gun. Numerous other versions were built including signals and communications vehicles as well as a technical support vehicle, designated DTP-62 (Czech) or WPT-TOPAS (Polish).
Design | OT-62A | OT-62C |
Name | TOPAS | TOPAS-2A |
Type | APC | APC |
Year | 1964 | 1966 |
Crew | 2 | 3 |
Dimensions | ||
Length (w/Gun) | 23 ft 3 in | 22 ft 12 in |
Width | 10 ft 4 in | 10 ft 7 in |
Height | 7 ft 4 in | 8 ft 11½ in |
Ground Clearance | 1 ft 3 in | 1 ft 5 in |
Track | 8 ft 12 in | 8 ft 12 in |
Track Width | 14 in | 14 in |
Track on Ground | 13 ft 5 in | 13 ft 5 in |
Weight | ||
Combat | 33,069 lbs | 36,134 lbs |
Ground Pressure | 0 psi | 0 psi |
Suspension | Torsion bar | Torsion bar |
Performance | ||
Speed (Off-Road) | 36 mph | 37 mph |
Range (Off-Road) | 286 mi | 354 mi |
Amphibious | Yes (7 mph) | Yes (7 mph) |
Vertical Obstacle | 4 ft 7 in | 4 ft 7 in |
Trench | 9 ft 2 in | 9 ft 2 in |
Gradient | 65% | 65% |
Side Slope | 40% | 40% |
Powerplant | ||
Engine | 1 x 300-hp PV-6 | 1 x 300-hp PV-6 |
Fuel | Diesel: 110 gal | Diesel: 137 gal |
Power/Weight | 20.00 hp/t | 18.30 hp/t |
Armament | ||
Main | None | 1 x 14.5-mmKPVTMachine Gun↑ 89.5° / ↓ -4° / ↔ 360° |
Secondary | Coaxial:1 x 7.62-mmÚV vz. 59Tagl: 1 x 82-mmT-21 | Coaxial:1 x 7.62-mmPKT |
Ammo | T-21: 12 | - |
Armor | ||
Type | Steel | Steel |
Thickness | 6 - 10 mm | 6 - 10 mm |
Max Effective | 66 mm RHAe | 66 mm RHAe |
Hull Upper Front | 8 mm / 83° | 8 mm / 83° |
Hull Lower Front | 10 mm / 53° | 10 mm / 53° |
Hull Upper Sides | 10 mm | 10 mm |
Hull Lower Sides | 9 mm | 9 mm |
Hull Upper Rear | 7 mm | 7 mm |
Hull Lower Rear | 6 mm / 42° | 6 mm / 42° |
Hull Top | 7 mm / 86° | 7 mm / 86° |
Hull Bottom | 6 mm | 6 mm |
Production | ||
Built | n/a | n/a |
Total | 0 |